SCLC R/L Toolholders with CCMT Carbide CVD Coated Inserts

$85.00 - $109.00
Shipping:
Calculated at Checkout

Description

SCLC R/L Toolholders with 10 pc CCMT Carbide CVD Coated Inserts

  • Negative 5° end or side cutting edge angle for positive 80° diamond CCMT CCGX inserts
Item# Right/Left Hand Model Shank Square (A & B) C F Inserts
2370-5004INS Right SCLC R -06-2J 3/8" 3-1/2" 1/2" 10 pc CCMT 21.51
2370-5006INS Right SCLC R -08-3A 1/2" 4" 5/8" 10 pc CCMT 32.51
2370-5008INS Right SCLC R -10-3B 5/8" 4-1/2" 3/4" 10 pc CCMT 32.51
2370-5010INS Right SCLC R -12-3B 3/4" 4-1/2" 1" 10 pc CCMT 32.51
2370-6008INS Left SCLC L -06-2J 3/8" 3-1/2" 1/2" 10 pc CCMT 32.51
2370-6006INS Left SCLC L -08-3A 1/2" 4" 5/8" 10 pc CCMT 32.51

 

 

Carbide Inserts, CVD Coating, CCMT, Black/Yellow, 10 ps/box

Carbide Inserts, CVD Coating, CCMT, Black/Yellow, 10 ps/boxCarbide Inserts, CVD Coating, CCMT

  • Insert Style: CCMT
  • 7 degree
  • Insert Grade: BPS101
  • Chip Breaker: MD
  • Material: Carbide
  • Coating: CVD Al2O3 TICN
  • Machining Parts Material: Steel
  • Machining Process: Finish

Product features

  • BPS101 Black/Yellow Coating Grade
  • CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
  • Can bear high temperatures
  • For steel and steel castings finishing to roughing processing
  • Continue cutting to light interrupted cutting
  • Machining of gray and ductile iron at low to medium cutting speed
  • For hard materials continuous cutting and light interrupted cutting from finishing to roughing
  • Wet and dry processing
  • Combination of fibrous TICN and fine grained Al2O3 increases abrasion resistance and anti-chipping
  • Preferred choice chip breaker on General Purpose Finishing

Features of chipbreaker

  • For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron
  • Operations: turning, facing and profiling
  • Advantages: all-round, reliable with problem-free machining
  • Limitations: depth of cut and feed, risk of overloading the cutting edge
  • Components typically: axles, shafts, hubs, gears, etc.

 

 ccmt-1.png

2200-1020-8.jpg

Extra Information

Brand:
Accusize Industrial
Weight:
0.10 KGS