California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security
Estimate shipping
Description
SCLC R/L Toolholders with 10 pc CCMT Carbide CVD Coated Inserts
- Negative 5° end or side cutting edge angle for a positive 80° diamond CCMT CCGX inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
| Insert SKU# | Right/Left Hand | Model | Shank Square (A & B) | C | F | Inserts |
| 2370-5004 | Right | SCLC R -06-2J | 3/8" | 3-1/2" | 1/2" | 10 pc CCMT 21.51 |
| 2370-5006 | Right | SCLC R -08-3A | 1/2" | 4" | 5/8" | 10 pc CCMT 32.51 |
| 2370-5008 | Right | SCLC R -10-3B | 5/8" | 4-1/2" | 3/4" | 10 pc CCMT 32.51 |
| 2370-5010 | Right | SCLC R -12-3B | 3/4" | 4-1/2" | 1" | 10 pc CCMT 32.51 |
| 2370-6008 | Left | SCLC L -06-2J | 3/8" | 3-1/2" | 1/2" | 10 pc CCMT 32.51 |
| 2370-6006 | Left | SCLC L -08-3A | 1/2" | 4" | 5/8" | 10 pc CCMT 32.51 |
Carbide Inserts, CVD Coating, CCMT, Black/Yellow, 10 ps/box
- Insert Style: CCMT
- 7 degree
- Insert Grade: BPS101
- Chip Breaker: MD
- Material: Carbide
- Coating: CVD Al2O3 TICN
- Machining Parts Material: Steel
- Machining Process: Finish
Product features
- BPS101 Black/Yellow Coating Grade
- CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures
- For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting
- Machining of gray and ductile iron at low to medium cutting speed
- For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Features of chip breaker
- For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
